Iowa
Representative warm-season temperature is 21°C, inside the 17–27°C optimum. Annual rainfall is 771 mm, inside the 700–1,000 mm optimum rainfall band.
Compared on representative regional temperature and rainfall.
Commercial crop requirements
Buckwheat has an optimum temperature range of 17–27°C within an absolute 7–40°C envelope.
Its profile calls for 400 mm of seasonal water and an optimum soil pH of 5–6.5.
Profile figures come from the source cited at the foot of this page. Regional figures are representative reference values, not coordinate-level measurements.
Use the optimum band for screening normal crop development and the absolute range as an outer tolerance boundary. Accumulated heat still depends on the local planting window and daily temperatures.
| Requirement | Profile value |
|---|---|
| Optimum temperature | 17–27°C |
| Absolute temperature range | 7–40°C |
| Heat to maturity | 1,450 growing degree days above a 5°C base |
| Photoperiod | Short-day response; 12-hour critical daylength |
| Vernalisation | Not required |
| Requirement | Profile value |
|---|---|
| Optimum pH | 5–6.5 |
| Tolerated pH range | 4.4–7.5 |
| Waterlogging tolerance | Intolerant |
An intolerant rating means drainage is a screening constraint. Check infiltration, perched-water risk, field outlets and the duration of saturation before committing land.
| Requirement | Profile value |
|---|---|
| Seasonal water requirement | 400 mm |
| Optimum rainfall band | 700–1,000 mm |
| Absolute rainfall range | 400–1,300 mm |
Irrigation becomes necessary when effective in-season rainfall is below the 400 mm seasonal requirement. Convert that gap into a field schedule only after accounting for soil water storage, application efficiency and local rainfall timing.
The profile assigns Buckwheat nitrogen-demand category 4, which translates to high demand. It is a relative category, not a fertiliser rate.
Set the field program from soil and tissue evidence, expected removals, prior-crop effects and local nutrient rules.
| Requirement | Profile value |
|---|---|
| Average yield | 1.03 t/ha reference average |
| Growing period | About 85 days to maturity, derived from 1,450 growing degree days above 5°C at a 22°C mean season temperature. Modelled from the crop profile. |
These examples pass a stated temperature or rainfall comparison using representative regional values. Regional screening, not parcel-level.
Representative warm-season temperature is 21°C, inside the 17–27°C optimum. Annual rainfall is 771 mm, inside the 700–1,000 mm optimum rainfall band.
Compared on representative regional temperature and rainfall.
Representative warm-season temperature is 18.5°C, inside the 17–27°C optimum. Annual rainfall is 704 mm, inside the 700–1,000 mm optimum rainfall band.
Compared on representative regional temperature and rainfall.
Representative warm-season temperature is 18°C, inside the 17–27°C optimum. Annual rainfall is 811 mm, inside the 700–1,000 mm optimum rainfall band.
Compared on representative regional temperature and rainfall.
These papers support the qualitative interpretation of the crop profile. No paper-derived figure is used on this page; the named crop and region fields remain the only sources of displayed agronomic numbers.
Waterlogging is a material crop-development risk, and its effect depends on when saturation occurs.
Flowering response depends jointly on day length, temperature and genotype rather than an invariant regional rule.
This profile cannot set planting depth, row spacing, seeding rate, cultivar choice, fertiliser rate, harvest timing, irrigation schedule or drainage design. Those decisions depend on cultivar, local practice and field conditions.
Use a coordinate-level audit, local field evidence and commercial terms before a land or lending decision.
Wikidata & Literature (Björkman and De Jong, 2003).