AgriAuditor

Commercial field guide · Texas

Growing field corn in Texas

This guide covers commercial field corn in Texas, from irrigated High Plains production to rain-fed systems in other regions.

This guide covers commercial grain corn; sweet corn and forage systems need different plans.

Corn plants growing in a field beneath an overcast sky

What changes for field corn in Texas?

Regional field guide

Texas corn ranges from irrigated High Plains production to rain-fed systems in other regions. Water source and crop purpose change the planting, population and harvest plan.

Texas references include South Plains late-planting guidance and statewide field-corn pest management.

Crop system
Commercial grain corn
Region scale
Texas production guidance
Farm decision
Coordinate planting, seed placement and harvest

Step 1 of 7 · Assess

Check the production system and field before committing

Use this checklist to identify field, seed, water and market constraints before committing acreage.

6 topics still to verify· planning aid only, not a suitability score

Local crop-planning checks

Confirm grain specifications, delivery window, drying and storage costs before choosing the hybrid and harvest plan.

Not reviewed

Inspect soil moisture, drainage, compaction and residue across representative areas. Keep equipment off ground that smears or ruts.

Not reviewed

Choose a hybrid that can reach maturity within the expected season. Account for planting date, local heat-unit supply and harvest cutoff.

Not reviewed

Record the previous crop, residue and pest history. For irrigated fields, compare water capacity with crop demand; for rain-fed fields, track stored soil water.

Not reviewed

Sample representative management zones for pH and nutrients, then set fertilizer rates from the results and the crop goal.

Not reviewed

Check buyer specifications, combine capacity, drying, storage, transport and delivery timing before planting.

Not reviewed

Selections stay in this browser tab and are not saved or sent anywhere.

Step 2 of 7 · Plan

Choose a Texas planting window

Regional planting calendar

Use the local production district

Texas

For late planting on the South Plains, work backward from the local frost date using hybrid maturity and whether the crop is for grain or silage. Other Texas regions need their own season and water plan.

Before the planter enters

Identify the production region, crop purpose, water source and hybrid maturity before setting the date. For irrigated fields, check available capacity; for rain-fed fields, check stored soil water and the forecast.

Historical seed-zone climate

Corn seedling-emergence temperature window

≥50°F · ≥10.0°C
Minimum soil-temperature trigger10°C (50°F)
Fastest emergence≈28.8°C (84°F)
Upper pre-emergence limit40°C (104°F)

The month band uses the regional minimum (50°F / 10.0°C) through 40°C. The optimum shown is for fastest seedling emergence, not whole-season crop growth. Climate period: 1996-01-01 to 2025-12-31; ERA5-Land soil-temperature estimates at 0–7 cm, summarized by complete year at the configured regional reference point.

Temperature-supported months: February–December in at least half of the complete years. Early, Main and Late divide each continuous supported span, following the carrot climate-window model.

Early sowingMain sowingLate sowing
April: below optimum, within emergence range

Median monthly mean: 21.1°C (70.0°F) · 30/30 complete years in the thermal band · 0/30 years in the optimum band

Temperature-window position: main.

Sources: University of Nebraska–Lincoln Extension — Soil temperature as a key factor in planting decisions · Beegum et al. — Corn seedling emergence and temperature in recent hybrids · Weaich, Bristow & Cass — High-temperature stress in preemergent maize · Open-Meteo Historical Weather API

Before planting, check field moisture, the short-range forecast, crop purpose and any insurance deadline.

Step 3 of 7 · Prepare

Prepare a fit seedbed and measure the root zone

Measure soil temperature at the cited seed-zone depth, then check soil moisture, drainage, residue and the forecast before planting.

A grower checking soil tilth in a corn seedbed
Check seedbed tilth before field traffic.

First check

A crumbly, workable seedbed

Check tilth before field traffic and keep heavy equipment off wet ground.

Seed placement reference

Widely used corn seed-depth ranges are 1.5–2 inches (3.81–5.08 cm). Use the soil-texture ranges below and check placement behind the planter.

Dig behind the planter to measure seed depth and check furrow closure across the field’s soil zones.

A grower opening a planted row to measure corn seed depth with a ruler
Expose the seed and measure from the soil surface.

Planting-depth reference

Planting depth by soil type

Field corn

These widely used corn seed-depth ranges bring Extension recommendations and field trials together by soil texture.

Fine-textured

Silty clay, clay loam, silty clay loam

1.5–2 in (3.81–5.08 cm)

Medium-textured

Silt loam, loam, gravelly loam

1.75–2 in (4.45–5.08 cm)

Coarse-textured

Sandy loam, sand, sandy lenses

1.75–2 in (4.45–5.08 cm)

Measure from the settled soil surface to the seed. Check the row after the first planter pass.

Cutaway schematic showing a corn kernel below the soil surface, with an emerging shoot, roots and a depth dimensionGeneral starting range: 1.5–2 in (3.81–5.08 cm)
Seed depth runs from the soil surface to the kernel. See the soil-type depth ranges above.

Check seed depth after planting

  1. Expose a short row section after the planter pass.
  2. Measure from the settled soil surface to the seed.
  3. Repeat where soil texture, residue or moisture changes.

Step 4 of 7 · Establish

Establish an even stand for the grain market

Shared commercial grain-corn benchmark

Plan one kernel per planter drop

Regional rates below tune this starting point.

Established stand

≈34,000 plants/ac

≈84,000 plants/ha

Planter rate · 95% establishment

≈36,000 seeds/ac

≈89,000 seeds/ha

Along 30-in / 76-cm rows

5.8 in · 14.8 cm

Seed-to-seed; average surviving plant spacing ≈6.1 in (15.6 cm).

Seed mass example: at 36,000 seeds/ac, an 80,000-kernel unit weighing 45 lb (20.4 kg) gives 0.45 unit/ac, or 20.25 lb/ac (22.7 kg/ha). Use the actual seed count and unit weight printed on the lot label; kernel size makes pounds or kilograms vary.

The planter meters individual kernels along a continuous row; this is one seed per drop, not a cluster of seeds in a planting pit. The final stand is lower than the drop count when some seeds fail to establish.

Texas population guidance: Texas 2025 trial examples: the non-irrigated Victoria site targeted 24,000 seeds per acre; the irrigated Dumas site targeted 32,000. Match the rate to district, irrigation capacity and crop purpose. For late-planted South Plains corn, the 2025 AgriLife guide allows considering an increase of up to 15%.
Close-up of maize kernels held above a prepared seedbed before sowing in the Texas production guide
Close-up of maize kernels before sowing.

At initial sowing

Use the intended field-corn hybrid and calibrate the planter for that seed lot. After the first pass, check seed spacing, depth and furrow closure, then adjust the planter as needed.

Calibrate

Set the planter by seeds per acre, then confirm singulation, seed spacing and downforce for the seed lot.

Check the row

Dig seed after the first pass and again when soil, residue or tillage changes.

Record the stand

In 30-inch rows, count live plants in 17 ft 5 in (5.3 m), then multiply by 1,000. Repeat in at least six representative field areas.

Regional field focus: Water availability is a key regional distinction. Identify irrigation capacity and stored soil water before applying a rain-fed or irrigated production assumption.

Step 5 of 7 · Manage

Manage crop risks through the season

Regional risk to plan around

Scout each southwestern corn borer generation and compare field counts with Texas thresholds. The first and second generations can cause lodging, ear drop and kernel injury; follow the product label if treatment is warranted.

Keep scouting evidence current

Use crop stage, field history and current local thresholds to guide scouting. Follow the product label for crop, use and application directions.

Walk rows and record what emerged

Check representative rows for gaps, doubles and uneven emergence. Compare plant counts with the planting record to locate stand issues.

Illustrative scene of a grower scouting newly emerged corn rows
Scouting corn emergence and row uniformity.

Step 6 of 7 · Harvest

Plan grain harvest and handling with the buyer

Settle these before planting

  • Intended grain use, grade and delivery requirements.
  • Hybrid maturity and expected harvest sequence.
  • Combine, transport, drying and storage capacity.
  • How wet-weather access or harvest delay will be handled.
  • Current grain quality, moisture and buyer specifications.

Texas planning note

Set hybrid maturity and harvest logistics by production region, crop purpose and grain-drying capacity.

Aerial view of field-corn harvest machinery and a trailer carrying harvested corn
Aerial view of corn harvest and field-to-trailer crop movement; equipment, timing and handling vary by operation.

Step 7 of 7 · Reference

Sources and reference dates

These are the research and regional production sources used to build the decisions above. The guide brings that evidence into one field-to-harvest sequence.